Total Complete top front glass touch monitor panel fix / alternative Kit : which includes are all components pre-mounted assembly kit which includes the top glass with digitizer / touch monitor purpose, ear speaker part with flex cable, top plastic house button and bottom house button pad sensor with flex cable, all components pre-mounted on the body. The body also has the constructed-in rubber seal line that go all around the monitor. Like the tools so you can open up the top front panel, raise up the flex cable connectors, pull off the Lcd assembly (not involved), then slide the Lcd assembly into this top front glass body assembly and now you are all set to re-connect the flex cable connectors back again to the main board, screw every little thing back again and your fix / alternative perform is carried out. Also which includes to our WirelessFinest link to installation information action by action with picture. Suitable : Apple Iphone 3g 16gb or 32gb (will NOT compatible with Iphone 3g or very first generation Iphone 2g).
Observe : this model is come with the foam pad pre-mounted at the digitizer flex cable connector and also protecting tapes pre-mounted on the sides of the body to stop the sides creating get in touch with to the case that can degrade signals.
Highest quality replacement parts pre-installed.
Including tools making this a complete replacement kit.
Foam Pad pre-installed on digitizer flex to enhance the performance after installed.
Protective tapes pre-installed on both side rails to prevent cause signal degradation.
All parts fully tested and ready to be used once installed.